Immobilization of liposomes onto quartz crystal microbalance to detect interaction between liposomes and proteins

To study the interaction between liposomes and proteins, intact liposomes were immobilized on a metal planar support by chemical binding and/or bioaffinity using a quartz crystal microbalance (QCM). A large decrease in the resonance frequency of quartz crystal was observed when the QCM, modified by a self-assembled monolayer (SAM) of carboxythiol, was added to liposome solutions. The stable chemical immobilization of intact liposomes onto SAM was judged according to the degree with which adsorbed mass depended on the prepared size of liposomes, as well as on the activation time of SAMs when amino-coupling was introduced, where the liposome coverage of electrodes was 69+/-8% in optimal conditions. When avidin-biotin binding was used on amino-coupling liposome layers, liposome immobilization finally reached 168% coverage of the electrode surface. Denatured protein was also successfully detected according to the change in the frequency of the liposome-immobilized QCM. The adsorbed mass of denatured carbonic anhydrase from bovine onto immobilized liposomes showed a characteristic peak at a concentration of guanidine hydrochloride that corresponded to a molten globule-like state of the protein, although the mass adsorbed onto deactivated SAM increased monotonously.     

Stereochemistry of pteriatoxins A, B, and C

The C34 and C2' stereochemistry of pteriatoxins A-C has been established. The availability of all the stereoisomers via total synthesis has played an indispensable role.     

In-Line Reactions and Ionizations of Vaporized Diphenylchloroarsine and Diphenylcyanoarsine in Atmospheric Pressure Chemical Ionization Mass Spectrometry

We propose detecting a fragment ion (Ph₂As⁺) using counter-flow introduction atmospheric pressure chemical ionization ion trap mass spectrometry for sensitive air monitoring of chemical warfare vomiting agents diphenylchloroarsine (DA) and diphenylcyanoarsine (DC). The liquid sample containing of DA, DC, and bis(diphenylarsine)oxide (BDPAO) was heated in a dry air line, and the generated vapor was mixed into the humidified air flowing through the sampling line of a mass spectrometer. Humidity effect on the air monitoring was investigated by varying the humidity of the analyzed air sample. Evidence of the in-line conversion of DA and DC to diphenylarsine hydroxide (DPAH) and then BDPAO was obtained by comparing the chronograms of various ions from the beginning of heating. Multiple-stage mass spectrometry revealed that the protonated molecule (MH⁺) of DA, DC, DPAH, and BDPAO could produce Ph₂As⁺ through their in-source fragmentation. Among the signals of the ions that were investigated, the Ph₂As⁺ signal was the most intense and increased to reach a plateau with the increased air humidity, whereas the MH⁺ signal of DA decreased. It was suggested that DA and DC were converted in-line into BDPAO, which was a major source of Ph₂As⁺.

Open image in new window

Graphical Abstract ?

     

Synthesis of alcohols from m-fluorophenylsulfones and dialkylboranes: application to the C14-C35 building block of E7389

The reaction of m-fluorophenylsulfone anions with dialkylboranes, followed by alkaline hydroperoxide oxidation, yields alcohols in high yields. Optimization of the process, scope and limitation, and application to the synthesis of one of the C14-C35 building blocks of E7389, a right half analogue of halichondrin B, are reported.     

Aerobic oxidation of methanol to formic acid on Au20-: a theoretical study on the reaction mechanism

The aerobic oxidation of methanol to formic acid catalyzed by Au(20)(-) has been investigated quantum chemically using density functional theory with the M06 functional. Possible reaction pathways are examined taking account of full structure relaxation of the Au(20)(-) cluster. The proposed reaction mechanism consists of three elementary steps: (1) formation of formaldehyde from methoxy species activated by a superoxo-like anion on the gold cluster; (2) nucleophilic addition by the hydroxyl group of a hydroperoxyl-like complex to formaldehyde resulting in a hemiacetal intermediate; and (3) formation of formic acid by hydrogen transfer from the hemiacetal intermediate to atomic oxygen attached to the gold cluster. A comparison of the computed energetics of various elementary steps indicates that C-H bond dissociation of the methoxy species leading to formation of formaldehyde is the rate-determining step. A possible reaction pathway involving single-step hydrogen abstraction, a concerted mechanism, is also discussed. The stabilities of reactants, intermediates and transition state structures are governed by the coordination number of the gold atoms, charge distribution, cooperative effect and structural distortion, which are the key parameters for understanding the relationship between the structure of the gold cluster and catalytic activity in the aerobic oxidation of alcohols.     

Can a meso-type dinuclear complex be chiral?: dinuclear β-diketonato Ru(III) complexes

Dinuclear Ru(III) complexes, [Ru(III)(acac)(2)(dabe)Ru(III)(acac)(2)] (acacH = acetylacetone; dabeH(2) = 1, 2-diacetyl-1,2-dibenzoylethane) and [Ru(III)(acac)(2)(tbet)Ru(III)(acac)(2)] (tbetH(2) = 1,1,2,2-tetrabenzoylethane) were synthesized by reacting [Ru(acac)(2)(CH(3)CN)(2)]PF(6) with dabeH(2) and tbetH(2) respectively, in toluene. The X-ray structural analysis of a meso-type dinuclear Ru(III) complex, ΔΛ-[Ru(III)(acac)(2)(dabe)Ru(III)(acac)(2)], showed that the bridging part became chiral due to the orthogonal twisting of two non-symmetrical β-diketonato moieties. To confirm this conclusion, the complex was resolved chromatographically to provide a pair of optical antipodes. Such chirality in the bridging part was not generated for [Ru(III)(acac)(2)(tbet)Ru(III)(acac)(2)], because the β-diketonato moieties in tbet(2-) are symmetrical.     

Quantitative imaging of ion transport through single nanopores by high-resolution scanning electrochemical microscopy

Here we report on the unprecedentedly high resolution imaging of ion transport through single nanopores by scanning electrochemical microscopy (SECM). The quantitative SECM image of single nanopores allows for the determination of their structural properties, including their density, shape, and size, which are essential for understanding the permeability of the entire nanoporous membrane. Nanoscale spatial resolution was achieved by scanning a 17 nm radius pipet tip at a distance as low as 1.3 nm from a highly porous nanocrystalline silicon membrane in order to obtain the peak current response controlled by the nanopore-mediated diffusional transport of tetrabutylammonium ions to the nanopipet-supported liquid-liquid interface. A 280 nm × 500 nm image resolved 13 nanopores, which corresponds to a high density of 93 nanopores/μm(2). A finite element simulation of the SECM image was performed to assess quantitatively the spatial resolution limited by the tip diameter in resolving two adjacent pores and to determine the actual size of a nanopore, which was approximated as an elliptical cylinder with a depth of 30 nm and major and minor axes of 53 and 41 nm, respectively. These structural parameters were consistent with those determined by transmission electron microscopy, thereby confirming the reliability of quantitative SECM imaging at the nanoscale level.     

On Ni catalysts for catalytic, asymmetric Ni/Cr-mediated coupling reactions

The importance of the Ni catalyst in achieving catalytic asymmetric Ni/Cr-mediated coupling reactions effectively is demonstrated. Six phenanthroline-NiCl(2) complexes 1a-c and 2a-c and five types of alkenyl iodides A-E were chosen for the study, thereby demonstrating that these Ni catalysts display a wide range of overall reactivity profiles in terms of the degree of asymmetric induction, geometrical isomerization, and coupling rate. For three types of alkenyl iodides A-C, a satisfactory Ni catalyst(s) was found within 1a-c and 2a-c. For disubstituted (Z)-alkenyl iodide D, 2c was identified as an acceptable Ni catalyst in terms of the absence of Z → E isomerization and the degree of asymmetric induction but not in terms of the coupling rate. Two phosphine-based Ni catalysts, [(Me)(3)P](2)·NiCl(2) and [(cy)(3)P](2)·NiCl(2), were found to meet all three criteria for D. The bond-forming reaction at the C16-C17 position of palytoxin was used to demonstrate the usefulness of the Ni catalysts thus identified.     

Relevance of continuously self-imaging gratings for noise robust imagery

We have designed miniaturized, simple, and robust cameras composed of a single diffractive optical element (DOE) that generates a continuously self-imaging (CSI) beam. Two different DOEs are explored: the J₀ Bessel transmittance, characterized by a continuous optical transfer function (OTF) and the CSI grating (CSIG), characterized by a sparse OTF. In this Letter, we will analyze the properties of both DOEs in terms of radiometric performances. We will demonstrate that the noise robustness is enhanced for a CSIG, thanks to the sparsity of its OTF. A camera using this DOE has been made and experimental images are presented to illustrate the noise robustness.     

Excited states and electronic spectra of annulated dinuclear free-base phthalocyanines: a theoretical study on near-infrared-absorbing dyes

The electronic excited states and electronic absorption spectra of annulated dinuclear free-base phthalocyanine (C(58)H(30)N(16)) are studied through quantum chemical calculations using the symmetry-adapted cluster-configuration interaction (SAC-CI) method. Three tautomers are possible with respect to the position of the pyrrole protons; therefore, the SAC-CI calculations for these tautomers were performed. The structures of the Q-band states are discussed based on the character of their molecular orbitals. The lower energy shift of the Q-bands because of dimerization is explained by the decrease in the HOMO-LUMO gaps resulting from the bonding and antibonding interactions between the monomer units. The electronic dipole moments of the nonsymmetric tautomer were calculated, and the possibility of charge-separated excited states is discussed. The relative energies of these tautomers are examined using density functional theory (DFT) calculations for several peripheral substituents. The relative energies of these tautomers significantly depend on the substituents, and therefore, the abundance ratios of the three tautomers were affected by the substituents. The absorption spectra were simulated from the SAC-CI results weighted by the Boltzmann factors obtained from the DFT calculations. The SAC-CI spectra reproduce the experimental findings well. The thermal-averaged SAC-CI spectra could explain the observed substituent effect on the structure of the Q-bands in terms of the relative stabilities and the abundance ratios of the tautomers. The SAC-CI and time-dependent density functional theory calculations are also compared. The CAM-B3LYP results agreed with the trends of the SAC-CI results; however, the CAM-B3LYP calculation overestimated the excitation energies in comparison with the SAC-CI and experimental results.